Piezo LEGS® Linear 6N Non-Magnetic Vacuum

LL10 version 11D — Non‑magnetic — Vacuum

Non-magnetic housing makes this motor suitable for use even in the most sensitive equipment. This motor can for example be used inside of an MRI scanner without creating image artifacts. Compact in size but surprisingly strong, this motor delivers up to 6.5N force.

  • Non-magnetic motor for sensitive environments

    The LL10 is designed for use in environments that require a completely non-magnetic and/or a vacuum-compatible motor. Its friction drive ensures full-force, power-off locking, and its Piezo LEGS® technology is ideal for any ‘move-and hold’ application able to benefit from high precision, instant response and low power consumption. The motor displays predictable sub-micron, direct-drive motion free from backlash. Resolution extends to single nanometer level or below when required. Gearheads and linear screws are not needed, which reduces overall size. Able to fit in spaces that other motors find difficult, LL10 delivers up to 6.5 N force.

    Piezo LEGS® motors don’t have the windings of a DC motor and will not be a source of magnetic flux. Motor housing and other parts are made from non-magnetic alloys. The LL10 is compatible to use even inside an MRI machine without disturbing the image. Non-magnetic motors have a magnetic flux density of less than 1 nT (sensor sensitivity in reference measurements) at a distance of 10 mm from the motor housing.

  • Five things to like about LL10

    • Completely non-magnetic
    • Direct drive free from backlash
    • Vacuum compatible
    • Zero power consumption when holding position
    • Compact size, yet delivers 6.5N force
  • Downloads

  • Specifications

      • Recommended
        Operating Force
      • 0...3 N
      • Stall Force
      • 6.5 N
      • Holding Force
      • 7 N
      • Speed Range
      • 0...15 mm/s
      • Microstep Length
      • 0.0005 µm
      • Sensor Resolution
      • Maximum Stroke
      • 80 mm
      • Power Consumption
      • 5 mW/Hz
      • Operating Temperature
      • -20...70 °C
      • Connector
      • soldered cable w.
        JST 05SR-3S
      • Weight
      • 23 gram
      • Size
      • 22 x 19.3 x 10.8
  • Contact us